Magic Oil 2K
For parquet, finished parquet and wood block RE
Properties:
- short drying period
- low emission tested to Gisco Ö20
- able to touch up without re-oiling the whole area
- natural feel
Description:
A combination of linen oil and natural wax.
The only oil used with hardener for a maximum resistance.
Colors may be added to suit the color choice.
Surface wear and cleanliness are comparable to lacquered floors.
P 600 Parquet and Wood Adhesive
For parquet, finished parquet and wood block RE
Properties:
- good initial tack
- little wood swelling
- high shear resistance
Description:
Solvent-based synthetic resin adhesive acc. to DIN 281 for bonding mosaic parquet, strip parquet and cross-grain lamellae parquet, 10 mm solid oak parquet (format: up to 250 x 50 mm), double- and three-layer finished parquet from 10 mm thickness (up to 1200 mm length), panel parquet and parquetry, exotic wood parquet, wood block RE acc. to DIN 68 702 on absorbent substrates, wood chipboards V100E1 and norm-conforming mastic asphalt screeds.
Use Thomsit P 625 for bonding single-layer finished parquet made of wood sensitive to swelling and for large-format parquet elements.
R 733 Epoxy / PU Cleaner
For adjusting the brush ability of
synthetic resin adhesives
Properties:
- especially for Thomsit synthetic resin adhesives
- good solvent properties
- removes adhesive stains
Description:
Highly solvent-containing thinner for adjusting the brush ability of synthetic resin adhesives if the adhesive has thickened due to solvent evaporation.
Also for producing undercoats prior to fixing materials with synthetic resin adhesives (e.g. Thomsit P 600), for cleaning tools and removing adhesive stains.
P 640 Joint Adhesive
For tongue-and-groove gluing of finished parquet, laminate floors, chipboards
Properties:
- solvent-free
- rapid hardening
- very high final adhesive strength
Description:
Dispersion glue for tongue-and-groove fixing of finished parquet elements, laminate floors and chipboards.
Meets the requirements of load group D3 specified in EN 204.
Resistant to short-term water exposure.
PA 60 Parquet Leveling Compound
Leveling compound for use under parquet
and layers of 0.5 – 100 mm in one application
Properties:
- self-leveling
- shear-resistant under parquet
- rapid binding of water
Description:
Low-tension floor leveling compound for all DIN-conforming substrates in dry indoor areas.
DD 2000 A/B
Solvent-based, 2-component PU wood floor lacquer for areas exposed to very heavy mechanical wear and chemicals.
The use of solvent-based products for sealing wood surfaces is becoming more and more restricted in accordance with TRGS 617.
For this reason, we recommend the use of water-based products like DD 2000 A/B.
Especially suitable for the surface treatment of:
- sanded parquet and wood flooring in very heavy wear areas, e.g. offices etc.
- stairs
Pall-X 98 A/B
Water-based 2-component wood floor lacquer for heavy wear wood flooring and with excellent resistance to heavy mechanical wear and chemicals.
Especially suitable for the surface treatment of:
- sanded parquet and wood flooring in heavy wear areas such as schools, offices, etc.