Our Engineered wood floors are custom made. This is relevant for color as these are true caused by chemical reaction. If you sand them a couple of years later it will be the same.
The surface can be flat, brushed or carved and coated with either oil or polyurethane water based. The edges are available without bevel, 2 sides or 4 side bevel edge.
Thickness ranges from 15mm to 21mm depending on size of board from 200mm width to 400mm width and length from 1m to 9 m.
Floors are free of toxin as hot laminated (core temperature exceeding 60 Celsius)
Warranty on floor is 15 years!
Meerbau
Meerbau
engineered floor with 5mm top layer and 10mm teak base.
Length: 1820 / 1950 / 2100 /
2250 / 2400 mm
With: 145 / 175 / 195 mm
Thickness: 15 mm
Satin oil finish UV protected laid with 2 mm PE foam tongue and groove glued
Ash
Ash
engineered floor with 5mm top layer and 10mm teak base.
Length: 1820 / 1950 / 2100 /
2250 / 2400 mm
With: 145 / 175 / 195 mm
Thickness: 15 mm
Satin oil finish UV protected laid with 2 mm PE foam tongue and groove glued
Red Wood
Red Wood
engineered floor with 5mm top layer and 10mm teak base.
Length: 1820 / 1950 / 2100 /
2250 / 2400 mm
With: 145 / 175 / 195 mm
Thickness: 15 mm
Satin oil finish UV protected laid with 2 mm PE foam tongue and groove glued
Oak
Oak
engineered floor with 5mm top layer and 10mm teak base.
Length: 1820 / 1950 / 2100 /
2250 / 2400 mm
With: 145 / 175 / 195 mm
Thickness: 15 mm
Satin oil finish UV protected laid with 2 mm PE foam tongue and groove glued